Qingdao Yituo Machinery Metal Coil Straightening Servo Feeder Slitting Rewinding Machine Line

• Customization: Available
• Industry: Steel Distribution, Automobile, Rolling Stock
• Thickness Range: 0.5-6.0 mm
• Model NO.: YT-SR
• Material Width: 500-1850 mm
• Coil Inner Diameter: 508-610 mm
• Coil Outer Diameter: 2000 mm
• Strip Thickness Tolerance: 0.15mm
• Coil Maximum Tower Value: 20 mm
• Strip Waviness: 30 mm/M
• Strip Maximum Camber: 10 mm/10000 mm
• Coil Weight: 30 Tons
• Transport Package: Water-Proof Film
• Specification: Automatic Equipment
• Trademark: YITUO
• Origin: Qingdao
• HS Code: 8462211000
• Production Capacity: 10 Sets Per Month

Product Description

 

Product Description

This production line is mainly used for uncoiling, leveling, and cross-cutting of pickled sheet coils, and is suitable for steel distribution, automobile, rolling stock, steel structure and other manufacturing industries.

1. Basic conditions
This production line can run continuously in the following environment:
ambient temperature :   0ºC~40ºC
Relative humidity:   ≤ 80%
air pressure :   0.4~0.7Mpa
using electric :   AC380V±10%,50Hz,use three-phase five-wire system

2. Technical parameters 

2.1   Raw material specification

Material	Cold rolled steel sheet,Hot rolled carbon steel sheet,high strength steel sheet etc
Material thickness	0.5mm~2.5mm      σs≤780Mpa, σb≤900Mpa 2.5mm~4mm        σs≤450Mpa, σb≤600Mpa 4mm~5mm         σs≤345Mpa, σb≤520Mpa 5mm~6mm         σs≤235Mpa, σb≤450Mpa
Material width	500-1850mm
Steel coil Inner diameter	Φ508~Φ610mm
Steel coil outer diameter	≤Φ2000mm
Strip Thickness Tolerance	≤±0.15mm
Coil maximum tower value	≤20 mm
Strip waviness	≤30 mm/m
Strip maximum camber	≤ 10 mm/10000 mm
Coil weight	≤30T

2.2  Shearing Parameters

Shearing length	700~4000mm/6000mm
Shearing accuracy	≤±0.5mm/m
Diagonal accuracy	≤±0.8mm/m
Leveling accuracy	≤2mm /m^2(unevenness<Roughness of the original sheet×25%)
Shear burr	≤2~3%
Stacking length range	700~4000mm/6000mm
Stacking height	650mm(Including height of station equipment:200mm)
Stack weight	≤5t
Stack accuracy	layer deviation  Width direction<1mm Longitudinal direction<1.5mm Stacking Deviation  Deviation at maximum stack height <3mm

2.3  Other parameters of the device

Leveling speed	0~40m/min(Blank thickness<3mm) 0~30m/min(Blank thickness≥3mm)
Production Rate	12~17pieces/min(Calculated by 2.5×1500×2400mm)
installation space	32m×8m
Blanking platform	2 sets
Output mode	Out feed transfer, side output
Line direction	facing the console from left to right(customerized)

 

 

 3. Process Flow

material roll up→decoiler→Lead-in device→straightener→Loop→coil side guiding→servo feeder→shearing machine→Stacker→Unloading cart

 

  

 

 

 

PRODUCT CATEGORY

 

 

Certifications

 

COMPANY OVERVIEW

 

 

PACKAGING

 

LOADING

Q: Are you a factory or trading company?
A: We are a factory which has been producing stamping automation machines for more than 20 years.

Q: What's the delivery time? 
A: The standard machine is 25 to 30 working days after payment. For compact coil feed lines or whole metal stamping lines, it needs 30-70 workdays depends on different specifications and production plan in our factory,we will confirm the delivery time based on the specific project itself. 

Q: Do you receive OEM or ODM?
A: Yes, we warmly welcome customers to do OEM and ODM in our factory.


Q:What's warranty time of your machine?

A:Usually the warranty time is 12 months. Also the warranty time can be extend acorrding the specific requirements.

Q:What after-sales service does YITUO provide?

A:For the standard decoiler straightener feeder machine, it's easy to install and debug it, most of our customers can do it by themselves; And what's more, our technical engineer can teach your operators how to install  and operate it.
For the compact coil feed machine and complete metal stamping line,YITUO can arrange engineers to go overseas for the coil handling equipment installation. They guide the customer's operators on-site.

Q: What information you need to prepare the quotation:
1. Coil thickness (min-max)
2. Coil inner and outer diameter (min-max)
3. What kind of your material
4. Weight of your coils (max)
5. How many tons you need per day or per month