Features Description
1.Due to different materials, points of curvature,a single correct arrangement of roller straightening can not achieve the accuracy requirements.Lihao STS series of original rough correction using a large rollsmall roll finishing leveling, aligning different straightening concept the use of coarse correction to produce a single curved arc of material volume and then use precise correction to be corrected, so as to achieve customer stamping requirements.
2. Leveling the aircraft wheel and corrective training wheels are imported SUJ2 manufacturing, heat treatment HRC60. After the grinding, hard chrome plated and then, after grinding to ensure that the hard chrome coating uniformity and shape of each shaft tolerances.
3.Crude correction of the machine under pressure to use synchronous worm body, with a dial indicator, can quickly find the leveling point.
4. The machine finishing leveling adjustment of floating four-point balance fine- tuning device, with a dial indicator, can quickly find the leveling point
5.The machine universal joint transmission, all transmission gears for high precision straightening products.
6. In addition to straightening roller, the guide wheel to add feed material produced to further improve the accuracy of rolling effect
7.The whole machine precision bearings,lubrication system,more equipment to extend the service life.
8.S Series precision correction unit correcting each wheel are equipped with leveling wheels, to ensure that the production process does not occur in the deformation, resulting in improved product quality and flatness.
9.The upper and lower rollers are fixed type supporting and enhancing the whole round of rigid to prevent deformation.
10. Due to material, material width and thickness of different materials, so there is no single numerical reference,it is suggested, in the mass production of test materials before taking sub-paragraph correction we get the results after the continuous production.
Specification
| Model |
STS-150 |
STS-200 |
STS-300 |
STS-350 |
|
| Max.material width |
150mm |
200mm |
300mm |
350mm |
|
| Materila thickness |
0.4~2.2mm |
0.4~2.2mm |
0.4~2.2mm |
0.4~2.2mm |
|
| Straightening speed |
16m/min |
16m/min |
16m/min |
16m/min |
|
| Motor |
1HPX4P |
2HPX 4P |
2HPX4P |
3HPX 4P |
|
| Section roller diameter |
Ф45mm |
Ф45mm |
Ф45mm |
Ф45mm |
|
| Roller quantity |
2/3(up/down) |
2/3(up/down) |
2/3(up/down) |
2/3(up/down) |
|
| Back press roller diamete |
Ф34mm |
Ф34mm |
Ф34mm |
Ф34mm |
|
| Back press roller quantity |
7/8 (up/down) |
7/8 (up/down) |
7/8 (up/down) |
7/8 (up/down) |
|
| Guide roller |
Ф80X4mm |
Ф80X4mm |
Ф80X4mm |
Ф80X4mm |
|
| Size |
1.6x1.0x1.5m |
1.6x1.05x1.5m |
1.6x1.15x1.5m |
1.6x1.2x1.5m |
|
|
|
|
|
|
|
|
Customer Reference
FAQ
Q: Are you a factory or trading company?
A: We are a factory which has been producing stamping automation machines for more than 20 years.
Q: What's the delivery time?
A: The standard machine is 25 to 30 working days after payment. For compact coil feed lines or whole metal stamping lines, it needs 30-70 workdays depends on different specifications and production plan in our factory,we will confirm the delivery time based on the specific project itself.
Q: Do you receive OEM or ODM?
A: Yes, we warmly welcome customers to do OEM and ODM in our factory.
Q:What's warranty time of your machine?
A:Usually the warranty time is 12 months. Also the warranty time can be extend acorrding the specific requirements.
Q:What after-sales service does YITUO provide?
A:For the standard decoiler straightener feeder machine, it's easy to install and debug it, most of our customers can do it by themselves; And what's more, our technical engineer can teach your operators how to install and operate it.
For the compact coil feed machine and complete metal stamping line,YITUO can arrange engineers to go overseas for the coil handling equipment installation. They guide the customer's operators on-site.
Q:What's the package of your coil feeding machine?
A:For standard small decoiler, straightener, feeder which go LCL shipping, SUNRUI machine will use plastic films cover the equiment, and then fix it into a woodencase.
For the coil feed lines and complete line which go FCL shipping, SUNRUI machine will fix each part with ropes on the shipping container and then wrapped them with plastic films.
Here with some pictures for your reference.
Q: What information you need to prepare the quotation:
1. Coil thickness (min-max)
2. Pipe diameter (min-max)
3. What kind of your material
4. Weight of your coils (max)
5. How many tons you need per day or per month
OUR FACTORY DISPLAY
){kind=link}