3 in 1 Compact Uncoiler Straightener Nc Servo Feeder

• After-sales Service: Outside Engineer Service
• Type: Rotating Anti-Bending and Straightening Machine
• Usage: Sheet, Wire, Pipe, Bar, Aluminium Foil Rolls
• Voltage: 380V
• Automatic Grade: Automatic
• Principle: Small Deformation
• Model NO.: NCBF
• Certification: TUV, CCC, ISO9001, CE, MSDS
• Warranty: 12 Months
• Customized: Customized
• Condition: New
• Raw Material: Gi Steel or Aluminum Coils
• Machine Type: Decoiler , Straightener and Servo F, CNC Automatic
• Core Components: Roller
• Feeder: Clamp and Feed Metal Strip Forward
• Transport Package: Wooden Package
• Specification: NCGK
• Trademark: YITUO
• Origin: China

Product Description

3 in 1 combination metal coil processing machine decoiler straightener and servo feeder large blanking production line

Product Description

STANDARD ACCESSORY

1.    Electric eye loop control system

2.    Outgoing catenary to assist and support the material

3.    Feed and Straightener rolls with a hard chrome finished

4.    Feeding line easily adjusts by advance worm gear screw jacks device

5.    Straightener adjusts by advance worm gear screw jacks device

6.    Left/right swing tension roll support device

7.    Reference indicator adjsuter

8.    Coil material entry support assembly

9.    Straightener opener device

10.  Hold down arm device

11.  A cluster gear set maximizes transmission of horsepower

12.  Transformer

13.  PLC Control Feeding program from mitusbishi

OPTION

1.    Coil car

2.    Shearing machine

 

 

Function instruction: use the unbending principle to release material bending stress to straighten the plate, then feed into the press
equipment according to set length and speed.
Driven method: AC servo motor
Straightening-feeding roller combination: straightening roller; assistant roller; feeding roller.
Straightening measure display method: dial display.
Straightening roller release method: pneumatic release.
Straightening measure adjusting method: manually wheel (Electrically Adjust for optional)
Straightening measure adjusting method: electrically adjust (for optional), no need to rotate the hand wheel, more precise, with
date storing function to store each group of material of straightening adjustment date which can save time for future use,
convenient for operation.

Roller driven method: gear driving, all gears adopt tempering, carburization, high-frequency quenching, precise grinding gear
IT6 level precise standard.

Straightening-feeding rollers flip-up system (optional): upper straightening-feeding rollers can be lifted by a hydraulic
cylinder from one side, lifting angle can reach up to 30 degrees. Operating the touch screen HMI or button of the hand operating
box to open the straightening-feeding rollers, this way, easy to clean rollers, to ensure material surface flatness and cleanliness. Adopts double oil cylinder to control.

 

 

 

Width of the material	70mm~600mm
Thickness of the material	2.0mm~8.0mm
Inside coil diameter	Φ460mm~Φ530mm
Max.coil outside diameter	Φ1600mm
Max.coil weight	5 ton
Straightening roll diameter	Φ120mm×7(upper*4/lower*3)
Material of straightening roll	GCr15(HRC58-62)
Feeding roll diameter	Φ136mm
Decoiler power	5.5Kw
Straightening power	11Kw
Feeding speed	0~20m/min
Feed Pitch accuracy	<±0.2mm
Other configuration
Straightening adjustment type	Eccentric shaft adjusted by worm and gear
Load material type	coil car
Feeding line adjust	Electric
Hold down the arm device	By pneumatic
Auto threading table device	By hydraulic
The coil keeper adjusts the width	Manual
Front coil keeper adjusts open	Pneumatic
The coil width guide at the straightener	Two hand-wheel adjusted
Coil tip de-bender device	Hydraulic
Operation control mode	Main control cabinet + action unit remote control switch
The coil end detects the sensor	With
Other technical data
Operating air	0.5Mpa
Operating hydraulic	7Mpa
voltage	3phase 380V
Feed Level from floor	1100mm-1300mm
Input material type	From down to up
Delivery side	From left to right
Equipment length(Not including outlet shelf)	≈5.0m

Detailed Photos

Mandrel of uncoiler

Four pieces of plates.
Each plate is fixed by screws very well.
Cantilever type.

Guiding device for straightener and feeder

While uncoiler decoil coil material, so material can get into the entrance of the feeder easily.

Round mandrel of uncoiler

Automatic expansion, by hydraulic cylinder drive.

Full round, for better loading.

 

 

 

 

Packaging & Shipping

 

Our Advantages

Qingdao Yituo Machinery Equipment Co., Ltd. implements Japanese technology into the production line, and uses a complete and excellent processing system through systematization, special accessories, etc., to flexibly and quickly supply the needs of each machine assembly to ensure product quality and delivery timeliness, Timely service. Strictly follow standard operations to create high-precision and high-quality stamping automation equipment comparable to Japanese models.
Our company adheres to the concept of long-term development and implements the research and development plan. Through the guidance of Japanese technical consultants, based on rich creativity and many years of production technology and practical experience, we have transferred complete key technologies and developed and manufactured first-class technology in the company. With the cooperation of the personnel, a new quality benchmark has been established for the stamping feeder manufacturing industry.