| After-sales Service: | Outside Engineer Service |
|---|---|
| Type: | Rotating Anti-Bending and Straightening Machine |
| Usage: | Sheet, Wire, H Beam Flange, Bar, Metal Sheet Strip Coil |
| Voltage: | 380V |
| Automatic Grade: | Automatic |
| Principle: | Small Deformation |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
a) Straightener and decoiler are combined in one machine, reducing the overall dimension, saving space, and reducing feeding error.
b) All rolls are made of solid bearing steel, have all been quenched, hard-chrome plated, high-hardness, strong resistance to abrasion long service life.
c) The machine adopts air cylinder pressing material, straightening gap adjustment adopts synchronous worm gear, and turning the handle one cycle can adjust the roller height by 1mm. To very suitable for thick material and has high precision adjustment.
d) Suit for stamping and processing all kinds of Hardware, Toy, and Auto parts, then feeding and straightening, accurate and durable.
The head of the straightener
1, The head adopts the design of a parallel roller, the upper 3 rollers/lower 4 rollers, a totally 7 refined roller structure
2, Adopting four-point fine adjustment, which is more suitable for processing high-precision products. Four-point independent pressure is used to adjust the pressure of the feeding wheel for incoming and outgoing materials, which can effectively prevent deviation and deformation of materials.
3, Support roller adopts galvanizing roller without power, material integrated forming, surface resistance to scraping grinding, using mechanical bearings, rotating flexible and durable.
4, It adopts a cast iron hand wheel, and its surface is electroplated, it is the most traditional hand wheel.
5, The transmission part is protected by the protective cover on both sides, equipped with a window for convenient observation
·Rack section
1, The equipment adopts a decoiler and straightener combined together, improving the utilization rate of the site.
2, The rack is designed with a cantilever beam, and all the plates are cut by laser plasma, with high precision and good interchangeability.
3, All plates are cut by laser plasma with high precision.
4, The overall structure is simple, general technical workers can assemble and replace equipment parts, convenient and fast, greatly reducing the maintenance cost.
·Straightener roller
1, The straightener wheel is made of solid bearing steel, thickened and electroplated after intermediate frequency, and the surface hardness is not low HRC58, to ensure the durability of the material.
2, Forging round steel with GCr15, after preheating treatment( spheroidizing annealing), then turning, milling, intermediate frequency treatment, rough grinding and cooling stabilization, then fine grinding, finally electroplating, maximize the guarantee of precision degree, concentricity, smoothness, and hardness, extend the service life of straightener roller.
·Drive gear
The gear processing process includes the following process: gear blank processing-tooth surface processing-heat treatment-Tooth surface finishing.
Raw parts are mainly forged parts, By normalizing treatment, improving its cutting, to facilitate cutting; according to the gear design drawings, rough machining, and then half fine processing, lathe, rolling, and gear shaping, make the gear basically formed; then by heat treatment to improve the mechanical properties.
According to the design requirements of the drawings, the final finishing, finishing benchmark finishing the tooth type. After the above treatment, our gear grade can reach grade 6, with high wear resistance and strength high, and long service life.
·Power section
1 Adopt model 80 worm gear vertical reducer, use the speed converter of gear, reduce the rotation number of the motor to desired rotation number,and get the mechanism with larger torque.
2, Adopt vertical motor, low vibration, low noise, fixed rotor part adopts pure copper coil, life is 10 times of ordinary coil, both ends are equipped with ball bearing, low friction, low temperature.
Electric control box
1, Adopt silver alloy relay, full copper coil, flame retardant safety base, long-lasting and durable.
2, Adopt safety protection adjustment circuit time delay, silver alloy contact, various and dial, satisfied different delay ranges.
3, The switch adopts sliding contact, with a self-cleaning function, normally open and normally closed contact adopts separate bonding structure, can work with different poles, is equipped with anti-rotation positioning, and stop loose mounting gasket.
4, Adopt a self-duplex flat button, the force is light, the key range is moderate, and the building block type combination structure. The contact is made up of keto-base composite points with strong conductivity and a large current, with a life span of up to 1 million times.
| Model No | GL-200B | GL-300B | GL-400B | GL-500B | GL-600B |
| Material thickness | 0.4-3.5mm | 0.4-3.5mm | 0.4-3.5mm | 0.4-3.5mm | 0.4-3.5mm |
| Material width | 200mm | 300mm | 400mm | 500mm | 600mm |
| Straightener roller | Upper 3/lower 4 | Upper 3/lower 4 | Upper 3/lower 4 | Upper 3/lower 4 | Upper 3/lower 4 |
| Feeding roller | 4set | 4set | 4set | 4set | 4set |
| Straightening speed | 15m/min | 15m/min | 15m/min | 15m/min | 15m/min |
| Straightening part adjustment | 4 manual wheel | 4 manual wheel | 4 manual wheel | 4 manual wheel | 4 manual wheel |
| Coil inner diameter | ∅450-530mm | ∅450-530mm | ∅450-530mm | ∅450-530mm | ∅450-530mm |
| Coil outer diameter | ∅1200mm | ∅1200mm | ∅1200mm | ∅1200mm | ∅1200mm |
| Coil weight | 500kg | 1000kg | 2000kg | 2000kg | 3000kg |
| Coil press arm | OPTIONAL PART | OPTIONAL PART | OPTIONAL PART | OPTIONAL PART | OPTIONAL PART |
| Expansion method | MANUAL | MANUAL | MANUAL | MANUAL | MANUAL |
1. Are you the manufacturer? Can we visit your factory?
We are a manufacturer and we are located in Anhui, China. And we have our own design team for product design.
And welcome you visit our factory and check our machine quality on spot, any question will be solved on spot at the first time.
2. What's your main product and what is your main foreign market?
Our main products are press brakes, shears machines, press, cutting machines, locking machines, auto duct line, and related products.
Our main foreign markets are Asia, North America, Europe, and Africa.
3. what are the advantages of your machines? And how can I believe the quality of your product?
The main configuration is to import quality products, and the Professional product quality inspection team ensure machine in
top-quality, precision, and life.
For example, Germany Bosch-Rexroth Valve group, Germany Siemens Main Motor, Schneider Electrics system, and so on.
Once tested as qualified .our machine would be sent out. So The quality of our product is stable and reliable.
4. And are you able to update the production process Information in time after placing our order?
After confirming your order, we would keep you updated on the production details of emails and photos.
5. Can we be your agent?
Yes, we are looking for a Global agent we will help the agency improve the market, and supply all the services like machine technical
problem or other after-sales problems, meanwhile, you can get big discounts and commissions.
6. Payment terms?
T/T, L/C, Western Union, Paypal, Alibaba Secure Payment, etc.
7. Are you providing product metal parts and providing us with technical guidance?
Wearing parts, Disassembly tool(free) is what we could provide. And we can give you technical guidance. Our technical staff can go
abroad to provide you with technical guidance.
8. How long is your warranty?
12 months free warranty, life-long maintenance.
9. Do you accept customer logos and customized ones?
we accept kinds of customized, including logos and machine.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}