| Customization: | Available |
|---|---|
| After-sales Service: | Outside Engineer Service |
| Type: | Pressure Leveler |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Feature
1. This is a specially designed straightener for medium-thick products that need improving the high precision punching treatment. As we all know, coil material can not produce good products without flattening and stress-relieving treatments; therefore, the performance of the straightener is critical in the production process.
2. The flattening and the straightener secondary wheels adopt the imported heat treatment and start production after plating the hard chrome and smiling to ensure the evenness of the chrome layers and the form tolerances of each bearing.
3. The flattening adjusting adopts floating four-point balancing equipment, with the dial indicator, which can find the leveling point rapidly.
4. It adopts the cardan joint and the tripe-gear transmission, suitable for straightener high-precision requirement products.
5. Except for the straightener roller the additional feeding wheel improves the punching precision.
6. It adopts the high precision axis and the lubricating system, which prolongs the machine's lifespan.
7. Each straightener wheel of the S series precision straightener adopts the flatting satellite to prevent distortion in the manufacturing process from happening, which improved the product's flatness quality.
8. With the fixed top and bottom secondary roller, enhanced the top and bottom wheel rigidity and prevent them distorts.
9. The triplication and the transmission structure adopt the synchronous style to transfer each leveling roller individually to lower the panel surface flatness improving the requirement because of the interspaces caused by wheels rotating.
10. Due to the differences in the material quality, width, and thickness, there are no fixed values as the preferences; therefore, taking some materials for a pilot run before the mass production and starting the continuous assembly after it reaches the standard.
|
Type |
SPS-150 |
SPS-200 |
SPS-300 |
SPS-400 |
|
Max.material width |
150mm |
200mm |
300mm |
400mm |
|
material thickness |
0.2-1.5mm |
0.2-1.5mm |
0.2-1.5mm |
0.2-1.5mm |
|
straightener speed |
16m/min |
16m/min |
16m/min |
16m/min |
|
motor |
1HP*4P |
2HP*4P |
2HP*4P |
3HP*4p |
|
section roller diameter |
Φ24mm |
Φ24mm |
Φ24mm |
Φ24mm |
|
section roller quantity |
9/10(up/down) | 9/10(up/down) | 9/10(up/down) | 9/10(up/down) |
|
section roller quantity |
10/11(up/down) | 10/11(up/down) | 10/11(up/down) | 10/11(up/down) |
|
size |
1.1*0.8*1.4m | 1.1*1.3*1.4m | 1.1*1.4*1.4m | 1.1*1.5*1.4m |
){kind=link}