Decoiling Pull-off Type Coil Reel Decoiler Machine for Feeding Pressing Line

• After-sales Service: Outside Engineer Service
• Type: Balance Roller Straightening Machine
• Usage: Sheet, Wire, H Beam Flange, Bar
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: MT
• Voltage: 380V
• Automatic Grade: Automatic
• Principle: Small Deformation
• Certification: CCC, ISO9001, CE
• Warranty: 24 Months
• Customized: Customized
• Condition: New
• Processing Material: Steel
• Steel Coil Inner: 508/610mm
• Max.Coil Width: 1200mm
• Transport Package: Wooden Package
• Specification: MT
• Trademark: YITUO
• Origin: China
• Package Size: 2500.00cm * 4000.00cm * 3000.00cm
• Package Gross Weight: 5000.000kg

Product Description

Product Description

A material decoiler machine located at the beginning of a process line is used to hold and safely pay off or uncoil the steel strip. It controls the speed and direction of the strip of metal as it is uncoiled from the coil and is sent to the press line for processing.
Manual or hydraulic models can be selected for inner diameter adjustment, there is a wide selection to choose from depending on the width and weight of the coil.


Hydraulic heavy-duty decoiler machines are used to facilitate the work of the operator and facilitate the inner tightening process, for higher-weight rolled sheet metal that can not be done used using a manual tightening system.

When the hydraulic roll decoiler is used, the process of loading the roll onto the decompiler will be facilitated and speeded up. Using a hydraulic loading car will further facilitate the loading process and shorten the time as well.

Features of each parts of the Metal sheet coil feeding line

Automatic loading coil car

Automatically lift the coil to the mandrel of the Decoiler Machine with the loading coil car. And then the mandrel can expand and clamp the coil.
a) Loading capacity 5T-20T
b) Up-and-down movement of the coil car by hydraulic cylinder
c) Horizontal movement by hydraulic motor
d) 2 Coil well-knit, no disperse

Decoiler:
 

a) Coil loading type: Single head with cantilever
b) Max. loading capacity: 10ton
c) Expansion type: Hydraulic
d) Brake type: pneumatic, stable and safe, also can prolong lifetime of the power system
e) Mandrel hydraulic expansion system. The hydraulic station provide power to drive the hydraulic cylinder to expand & draw back the mandrel to clamp coil or release the coil.
f) Press arm device to hold the strips, preventing the coil loose. Furthermore, the press arm is equipped with a PU roller to hold the strips, doesn`t scratching the strip surface.
g) Support arm device. Driven by hydraulic cylinder, it was used to guide and support strips, Furthermore, several sets of rollers were installed in the device, and all rollers were chrome plated, so the surface is very smooth, preventing scratching material surface.
h) Limit arm device, clamping coil in the width direction, preventing coil collapsing when coil was too narrow. Furthermore, the width between the two back gauge arms was designed adjustable by operating the manual wheels, coil width range is 70 mm-1800 mm.
i) Machine equipped with the hydraulic station, providing oil pressure to drive the mandrel expansion & contraction and hydraulic cylinder.
j) Sensor device: electric eye loop control system, stable, safe, and long lifetime. With the electric eye loop control system, the decoiler release strips automatically. (you can refer to the following image)
 

Detailed Photos

 

Product Parameters

Model	MT-400F	MT-500F	MT-600F	MT-700F	MT-800F	MT-1000F	MT-1200F
Coil Width	200 mm	300 mm	400 mm	500 mm	600 mm	700 mm	800 mm
Coil Thickness	0.1 mm - 3.2mm
Coil I.D.	450-530 mm
Coil O.D.	1200 mm
Coil Weight	1000 kgs	1500 kgs	2000 kgs	3000 kgs		5000kgs
Expansion	Hydraulic Expanion
Pressing Arm	Pneumatic Type Pressing Arm
Inverter	Delta, Taiwan
Speed	16 m/min

Company Profile

Qingdao Yituo Machinery Equipment Co., Ltd., on the basis of customer needs and market trends, clarifies the direction of product research and development, and always adheres to the service tenet of "survive by quality, develop by service, and win customers by integrity". All products are designed by engineers, and each production link and processing technology have strict requirements and standardized inspection standards.
 

 

Our Advantages

Our company adheres to the concept of long-term development and implements the research and development plan. Through the guidance of Japanese technical consultants, based on rich creativity and many years of production technology and practical experience, we have transferred complete key technologies and developed and manufactured first-class technology in the company. With the cooperation of the personnel, a new quality benchmark has been established for the stamping feeder manufacturing industry.
Qingdao Yituo Machinery Equipment Co., Ltd. implements Japanese technology into the production line, and uses a complete and excellent processing system through systematization, special accessories, etc., to flexibly and quickly supply the needs of each machine assembly to ensure product quality and delivery timeliness, Timely service. Strictly follow standard operations to create high-precision and high-quality stamping automation equipment comparable to Japanese models.
 

 

Usage Area

 

factory warehouse